"Crystal Sheen®" Pour-On, High-Gloss Finish - 1 Gallon
Used commercially on restaurant tables & bar tops for over 40 years!
Crystal Sheen High Gloss Polymer Coating is an extremely clear, tough, high-gloss surface coating formulated to produce a deep glass-like appearance in a single layer on a sealed surface. Two or more layers are often applied for added depth and protection. Crystal Sheen has an extended “open time” which allows up to 5 minutes in the mixing container at 70º F and up to 30 minutes working time on the surface being coated.
Crystal Sheen Polymer Coating is waterproof, heat & alcohol resistant.
Flood Coat Calculator Tool
(Quickly find out how much product you will need for your project)
READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) BEFORE USING THIS PRODUCT.
| General | Crystal Sheen is an extremely clear tough high gloss surface coating formulated to produce a deep gloss appearance. |
| A/B Mix Ratio | 1:1 |
| Thin Film Set Time/Hour | 7 |
| Durometer Hardness 2 Hours @ 60º C) |
80 |
| Tensile Strength | 1887 |
| Tensile Modulus | 32,700 |
| Tensile Elongation % | 78 |
| Flexural Yield Strength | 676 |
| Flexural Yield Strain | 6.5 |
| Flexural Yield Modulus | 38,447 |
| Tg - ºC | 46 |
| Viscosity CPS @ 77º F: Resin (A) Hardener (B) |
2660 450 |
| Density (lbs/gal): Resin (A) Hardener (B) |
9.45 7.96 |
| Gel Time (minutes) (100 gram mass @ 22º C) |
28 +/- |
